Advertise
Sign In
Sign Up
Home
Members
Buyer's Guide
Articles
Documents
Videos
Photos
Forum
Groups
Events
Sounds
Polls
Classifieds
Reference
News
About Us
iSEMcon(R)
iSEMcon(R)'s Documents
Search Documents
iSEMcon(R)'s Documents
Microphone Array e.g. 4x4 -OUT OF THE BOX - , IEPE, TEDS, Mechanics, cables, USD 4900 (EUR 3400),
0 Comments | 418 Views
EMX-7150 measurement microphone
0 Comments | 165 Views
1/4" - 7101 series measurement measurement and array microphone
0 Comments | 162 Views
Categories
All Categories
Sound
iSEMcon(R)'s Tags
#Microphone
#Array
#Phantom
#CCP
#ICP
#IEPE
#TEDS
#Measurement Microphone
#Phantom Power
#Class 1
#Microphone Array
#Measurment Microphones
#calibrator
#ACCESSORIES
Archives
2011
July 2011
NEW ACOUSTICS CATALOG
Created by
iSEMcon(R)
July 20, 2011
- Category:
Sound
- Tags:
#calibrator
#Measurment Microphones
#ACCESSORIES
0 Comments, 161 Views
Content Type
Product/Service Info
Acoustic Measurement Products © iSEMcon 04/2011 iSEMcon GmbH Germany www.iSEMcon.com iSEMcon LLC USA About - iSEMcon is a privately owned company, located in both Viernheim, Germany and Northwest, Ohio. Partners Wolfgang Frank and Win Otto are co-workers in the sensor business with over twenty (20) years of experience. Wolfgang Frank has an additional fourteen (14) years of experience in measurement microphone design and manufacturing. He also founded IBF-Akustik e.K. in 1997. IBF-Akustik e.K. became iSEMcon GmbH in April 2010. Acoustic Measurement Products iSEMcon offers a variety of new acoustic measurement microphones and associated products on a budget. The newly developed constant current powered microphones (CCP) are well known in the market and compatible with equipment from other manufacturers. Other proprietary names*1 for the same interface are ICP®, IEPE®, Deltatron®, AcoTron®, Isotron®, Piezotron® and more. See product overview for reference. CCP powered microphones transform the high impedance microphone output into a low impedance voltage signal (less than 10 Ohms) and are capable to drive long cables. A big plus under todays EMI (Electromagnetic Interference) requirements. All our microphones are fully ESD protected. The EMM-07/13D080CCP also available with Phantom power option (EMM-07/13D080-P48) has High Energy Surge protection built-in. iSEMcon offers a large variety of acoustic measurement products such as electret and traditional prepolarized condenser microphones together with adapters, cables and signal conditioning equipment. Acoustic measurement products. Sound level and sound quality analysis on a budget. Sound power testing Noise and vibration analysis Home theater treatment iSEMcon microphones vs our competitor. Competitive pricing Superior performance - improved linearity - greater stability © This catalog is valid from April 15, 2011. Reprinting, even in extracts, only by our permission. Errors and modifications excepted. Specifications subject to change without notice. www.iSEMcon.com page | 3 CONSTANT CURRENT POWERED MICROPHONES* - ¼” and ¼” w/ ½” body (* ICP™, IEPE, DeltaTron™, CCP, ISOTRON™ compatible) ¼” Frontend ¼“ (7mm) array type microphone with SMA or SMB-receptable Heavy Duty Version - operates from constant current power. Ideal microphone for large count sound field measurements (acoustic holography) as well as single channel measurements. prepared for TEDS (Transducer Electronic Data Sheet) long cable drive capability integral preamp small and rugged large dynamic range stainless steel housing individual calibration chart Accessories: see page 10 Adapter Bushing Cable For more technical data see EMM-7101 series microphone. Differs only in size SMA connector option (threaded connector) SMB connector option (snap-on connector) SPECIFICATIONS EMM-07D146/#-CCP/#-T PERFORMANCE Frequency Response characteristic Polarization Voltage Nominal Sensitivity @1kHz Microphone Polarity Frequency Response calibrated Frequency Response ± 1dB ± 2dB ± 3dB Phase Match 100-5000 Hz Inherent Noise100-10000 Hz Inherent Noise 1/3 Oct. Dynamic Range (3% distortion) typ. Values for: 4mA CCP; 21V excitation voltage; 23°Celsius ENVIRONMENTAL Operating Temperature range Storage Temperature Range Operating Humidity Range Axial Vibration Sensitivity PHYSICAL Housing Material Sealing Output Connector Dimensions Weight CONFORMITY IEC 61000-6-1 -10…+55° -20…+70° 0…90%r.H. ~ 50dB Free-Field Prepolarized See order info See order info 10…20.000 Hz 50…8000 Hz 20…12000 Hz 10…18000 Hz ± 5° <30dB typ. <15dB typ. See order info Stainless Steel Polyurethane/Epoxy SMB coaxial socket Ø ¼“(7mm) x 4“(146mm) 0.8 oz (25g) ELECTRICAL Constant Current Power Constant Current Power nominal Excitation Voltage Output Bias Voltage Output Impedance Phantom Power (requires XLRmale to BNC connector adapter) 2…20 mA 4 mA 18…30V 7±2V <10 Ω 12…52Vdc SPECIAL FUNCTIONALITY TEDS (IEEE 1451.4) ESD protection Template 27 prog. 30kV page | 4 sales@iSEMcon.com Ordering information : EMM-07D146-series Sensitivity, typ. Max. SPL, mV @ 94dBspl 3% distortion limit 30 30 6 6 125 (130) 125 (130) 140 (145) 140 (145) Order No. 130010 130013 130011 130012 Name EMM-07D146/S-CCP/A-T EMM-07D146/S-CCP/B-T EMM-07D146/H-CCP/A-T EMM-07D146/H-CCP/B-T Signal polarity Non inverting Non-inverting inverting inverting Connector SMA SMB SMA SMB ¼”- ½”body, BNC receptable. long cable drive capability integral preamp small and rugged large dynamic range stainless steel housing individual calibration chart Accessories: see page 10 Adapter Bushing Cable For more technical data see EMM-7101 series microphone. Differs only in size and connector. Ordering information : EMM-13D082-series Order No. 130021 130020 Name EMM-13D082/H-CCP/C-T EMM-13D082/S-CCP/C-T Sensitivity, typ. mV @ 94dBspl Signal polarity Max. SPL, 3% distortion limit 6 30 Non-inverting inverting 140 (145) 125 (130) SPECIFICATIONS EMM-13D082/#-CCP/#-T PERFORMANCE Frequency Response characteristic Polarization Voltage Nominal Sensitivity @1kHz Microphone Polarity Frequency Response calibrated Frequency Response ± 1dB ± 2dB ± 3dB Phase Match 100-5000 Hz Inherent Noise100-10000 Hz Inherent Noise 1/3 Oct. Dynamic Range (3% distortion) typ. Values for: 4mA CCP; 21V excitation voltage; 23°Celsius ENVIRONMENTAL Operating Temperature range Storage Temperature Range Operating Humidity Axial Vibration Sensitivity Range PHYSICAL Housing Material Sealing Output Connector Dimensions Weight CONFORMITY IEC 61000-6-1 -10…+55° -20…+70° 0…90%r.H. ~ 50dB Free-Field Prepolarized See order info See order info 10…20.000 Hz 50…8000 Hz 20…12000 Hz 10…18000 Hz ± 5° <30dB typ. <15dB typ. See order info Stainless Steel Polyurethane/Epoxy SMB coaxial socket Ø ¼“(7mm) x 3 ¼““(82mm) 1,1 oz (35g) ELECTRICAL Constant Current Power Constant Current Power nominal Excitation Voltage Output Bias Voltage Output Impedance Phantom Power (requires XLRmale to BNC connector adapter) 2…20 mA 4 mA 18…30V 7±2V <10 Ω 12…52Vdc SPECIAL FUNCTIONALITY TEDS (IEEE 1451.4) ESD protection Template 27 prog. 30kV www.iSEMcon.com page | 5 LOW PROFILE SURFACE MICROPHONE* The iSEMcon Surface Microphone is a low-cost microphone for general purpose measurements on almost flat surfaces exposed to slip stream. Diameter 18mm Height 3.2mm Features Low sensitivity to base bending Dust protected Built-in CCP preamplifier with TEDS Light weight Choice between two (2) optional fairings Accessories: see page 10 screw down fairing option Applications Wind-induced noise on ground and airborne vehicles Acoustic radiation from surfaces Noise tests in wind tunnels compact fairing for use with self-adhesive tape, wax or glue. Ordering information : EMM-07D146-series Order No. 130030 Name EMM-18D003/S-CCP/2mC-T Sensitivity, typ. mV @ 94dBspl 30 Max. SPL, 3% distortion limit 120 (125) Connector 1m pigtail - BNC SPECIFICATIONS EMM-13D082/#-CCP/#-T PERFORMANCE Frequency Response characteristic Polarization Voltage Nominal Sensitivity @1kHz Microphone Polarity Frequency Response calibrated Frequency Response ± 1dB ± 2dB ± 3dB Phase Match 100-5000 Hz Inherent Noise100-10000 Hz Inherent Noise 1/3 Oct. Dynamic Range (3% distortion) typ. Values for: 4mA CCP; 21V excitation voltage; 23°Celsius ENVIRONMENTAL Operating Temperature range Storage Temperature Range Operating Humidity Axial Vibration Sensitivity Range PHYSICAL Housing Material Sealing Output Connector Dimensions Weight CONFORMITY IEC 61000-6-1 -10…+55° -20…+70° 0…90%r.H. ~ 50dB Free-Field Prepolarized 30mV/Pa Non-Inverting 10…20.000 Hz 50…8000 Hz 20…12000 Hz 10…18000 Hz ± 5° <30dB typ. <15dB typ. 131 dBspl Stainless Steel Polyurethane/Epoxy SMB coaxial socket Ø 0.7 “(18mm) x 1/8“ (3,2 mm) 0.7 oz (20g) ELECTRICAL Constant Current Power Constant Current Power nominal Excitation Voltage Output Bias Voltage Output Impedance Phantom Power (requires XLRmale to BNC connector adapter) 2…20 mA 4 mA 18…30V 7±2V <10 Ω 12…52Vdc SPECIAL FUNCTIONALITY TEDS (IEEE 1451.4) ESD protection Template 27 prog. 30kV page | 6 sales@iSEMcon.com PHANTOM POWERED MICROPHONES, super compact design 1/4" front - 1/2" body Measurement microphone, phantom powered 3% distortion vs Sound Pressure Level super compact design Mini XLR connector Human readable Calibration filrs included (ASCII data/ Text file) Printed frequency response data on-axis and diffusefield calibration data included at no additional cost Features: Phantom power 12 / 24 / 48 Volts Linear frequency response 10...20000 Hz (calibration chart and calibration file included) Omnidirectional Data file format stored in #####.cal Human readable ASCII file: www.iSEMcon.com freefield Sensitivity 30,88 mV/Pa @1kHz 10,00 -0,02 10,40 0,03 10,82 0,06 11,26 0,10 11,71 0,14 12,18 0,17 …… …………… 0,94 19945,31 0,94 19968,75 0,93 19992,19 0,93 ^ frequency (Hz) ^amplitude response (dB) Large Dynamic Range Stainless steel housing Polyurethane sealed ESD and Surge-Voltage Protection Included Accessories: 5m MiniXLR to XLR Cable Accessories: see page 10 Adapters Bushing Cable www.iSEMcon.com page | 7 Excerpt from cal-sheet. Ordering information : EMM-13D082-series Order No. 140011 140010 Name EMM-13D082/H-P48/RM EMM-13D082/S-P48/RM Sensitivity, typ. mV @ 94dBspl Signal polarity Max. SPL, 3% distortion limit 6 30 Non-inverting inverting 140 (145) 125 (130) SPECIFICATIONS EMM-13D082/#-P48/RM PERFORMANCE Frequency Response characteristic Polarization Voltage Nominal Sensitivity @1kHz Microphone Polarity Frequency Response calibrated Frequency Response ± 1dB ± 2dB ± 3dB Phase Match 100-5000 Hz Inherent Noise100-10000 Hz Inherent Noise 1/3 Oct. Dynamic Range (3% distortion) typ. Values for: 24V Phantom Power; 23°Celsius ENVIRONMENTAL Operating Temperature range Storage Temperature Range Operating Humidity Range Axial Vibration Sensitivity PHYSICAL Housing Material Sealing Output Connector Dimensions Weight CONFORMITY IEC 61000-6-1 SPECIAL FUNCTIONALITY ESD and Surge Voltage protection -10…+55° -20…+70° 0…90%r.H. ~ 50dB Free-Field Prepolarized See order info See order info 10…20.000 Hz 50…8000 Hz 20…12000 Hz 10…18000 Hz ± 5° <30dB typ. <15dB typ. See order info Stainless Steel Polyurethane/Epoxy SMB coaxial socket Ø ¼“(7mm) x 3 ¼““(82mm) 0.8 oz (25g) ELECTRICAL Output Impedance Phantom Power (requires XLRmale to BNC connector adapter) <100 Ω 12…52Vdc page | 8 sales@iSEMcon.com ARRAY MICROPHONE, ultra lightweight TYPICAL APPLICATIONS Multi-channel measurements Single-channel measurements Sound-power and sound-field analysis Low-cost in-car measurements Industrial Acoustics The iSEMcon® Array Microphone EMM-7101-CSTB is an economically priced prepolarized microphone for single and multi channel measurements in arrays and matrices. It is a full featured product with integrated CCPPreamplifier and programmed TEDS-chip (Template 27). The long 4” body minimizes the sound field influence from holding clamp or array mechanics. works from Constant Current Power (CCP) Phantom Power (PH) By the use of an connector adapter (no signal converter necessary FEATURES CSTB-Version Frequency range 10…20000Hz Sensitivity 30mV/Pa typ. Signal polarity: positive Dynamic range 30… >125dBspl 3% distortion limit >130dBspl typ. Built-in TEDS (template 27) Calibration chart and data included on CD Excellent amplitude and phase matching SMB connector CCP or Phantom Power Dimensions: diameter ¼” (7mm) length w/ connector 4” (101mm) Weight 0.3oz (9grams) DIFFERENCE CHTB Version Sensitivity 6mV/Pa typ. Signal polarity: positive Dynamic range 30… >140dBspl 3% distortion limit >145dBspl typ. SPECIFICATIONS Celsius PERFORMANCE Frequency Response characteristic Polarization Voltage Nominal Sensitivity @1kHz Microphone Polarity Frequency Response calibrated Frequency Response ± 1dB ± 2dB ± 3dB Phase Match 100-5000 Hz Inherent Noise100-10000 Hz Inherent Noise 1/3 Oct. Dynamic Range (3% distortion) typ. Values for: 4mA CCP; 21V excitation voltage; 23° Free-Field Prepolarized See order info See order info ENVIRONMENTAL Operating Temperature range Storage Temperature Range Operating Humidity Axial Vibration Sensitivity Range PHYSICAL Housing Material Sealing Output Connector Dimensions Weight CONFORMITY IEC 61000-6-1 -10…+55° -20…+70° 0…90%r.H. ~ 50dB Inverting 10…20.000 Hz 50…8000 Hz 20…12000 Hz 10…18000 Hz ± 5° <30dB typ. <15dB typ. See order info Stainless Steel Polyurethane/Epoxy SMB coaxial socket Ø ¼“(7mm) x 4“(101mm) 0.3 oz (9g) ELECTRICAL Constant Current Power Constant Current Power nominal Excitation Voltage Output Bias Voltage Output Impedance Phantom Power (requires XLRmale to BNC connector adapter) 2…20 mA 4 mA 18…30V 7±2V <10 Ω 12…52Vdc SPECIAL FUNCTIONALITY TEDS (IEEE 1451.4) ESD protection Template 27 prog. 30kV ACTUAL SIZE www.iSEMcon.com page | 9 Ordering information and additional data here: # 130014 EMM-7101-CSTB # 130015 EMM-7101-CHTB Accessories: see page 10 Adapter Bushing Cable Mechanical Array Set The iSEMcon® EMM-7101-C#T# series consists of a special ICP and Phantom Power compatible circuitry. The built-in prepolarized microphone cartridge controls an AC/DC-Zener Diode circuitry with an output impedance as low as 10 Ohms (as per circuitry simulation). This is very unique and new in the market and makes the microphone compatible to Constant Current power (ICP) as well as Phantom Power without loss in functionality and signal quality and almost independent from source impedance. It also has a TEDS EEPROM built-in being fully compatible with the IEEE1451.4 standard. Data as per IEEE 1451.4 TEDS IC:DS2431 Serial:0000028DFD06 Basic TEDS Check Sum:C9 Version letter:@ Manu ID: Version number:1 Model No: 30010 Serial number: 121001 Standard Template TEDS Selector:0 Polarity :positive Template:27 Mapping :0 Sel Case:0 Sig Type :0 Sens :30,9 AC/DC :1 Ref Freq:989 Cal Date :23.12.2010 Polar :Prepolarized Cal init :FRA Sel Case:0 Cal period:0 Mic Type:Free Loc ID :0 Mic Size:1/4" Selector :3 Volume :0 End Select:0 Sel Case:0 Power Source ICP 2mA ICP 4mA ICP 10mA Phantom 48V / 6,8kΩ Phantom 24V / 2,4kΩ Phantom 12V / 2,4kΩ 18V 30,18mV 30,37mV 30,64mV 21V 30,22mV 30,46mV 30,78mV 30V 30,31mV 30,52mV 30,82mV 30,60mV 30,49mV 29,93mV The microphone powers from Constant Current Power (ICP™, IEPE, DeltaTron™, CCP, ISOTRON™, AcoTron™ compatible *1) or from Phantom Power (12..52Vdc) by the use of an XLR to BNC connector adapter or XLR to SMB cable. The microphone does not require an electronic signal converter. There are no limitations in functionality or loss in signal quality while being powered from Phantom Power. Microphone sensitivity is almost independent from power source (less than 1 dBmV) (see sample). Note: While applying phantom power the TEDS functionality is not available. page | 10 sales@iSEMcon.com Ordering information : EMM-7101-series Sensitivity, typ. Max. SPL, mV @ 94dBspl 3% distortion limit 30 6 125 (130) 140 (145) Order No. 130014 130015 Name EMM-7101/S-CCP/A-T EMM-7101/H-CCP/A-T Signal polarity Non inverting inverting Connector SMA SMA MICROPHONE ARRAY light weight - 4x4 array total weight 2 lbs. (0,9 kg) includes microphones, add 0.5 oz (16grams) for additional microphone and clamp, add 8 oz (100grams) for additional horizontal rail to e.g. build a 5x5 array. easy to reconfigure for custom microphone to microphone spacing. flexible - built from extruded aluminum profile using pre-threaded mounting rails (1/5" spacing) or single locking nuts. economically priced 4x4 array, includes array microphones, standard cables, frame and mechanics. runs out of the box - includes all necessary tools for configuration and mounting. Total weight 4x4 array as shown including cable weight: 3.5 lbs (1,5 kg). Ordering information : REQUEST A QUOTE www.iSEMcon.com page | 11 SIGNAL CONVERTER Signal converter SA-P48/CCP-C CCP-Phantom compatibility is an iSEMcon microphone inherent feature. Do not apply Phantom Power to competitors products. This may cause damage. Ordering information : Signal converter, Phantom-power to CCP to adapt CCP powered microphones and sensors to phantom power. Needed for 3rd party microphones. Note: iSEMcon’s ICP microphones are Phantom power compatible without the use of an signal converter. linear frequency response 4mA CCP power 18...48v Phantom power, 12V operation microphone dependent BNC CCP input connector Order No. 650011 Name CV-BFXM CABLES Features: Selfbiasing - depends on attached CCP device Improved Voltage Surge Protection Compatible (ICP®, IEPE®, Deltatron®, AcoTron®, Isotron®, Piezotron® *1) Compact design Temperature: –10 to +55°C (+14 to +131°F) Ordering information : Order No. 340020 Name SA-P48/CCP iSEMcon supplies all cables used with our microphones and measurement equipment. If you need a special cable request for a quote. Ordering information : Order No. 720010 720011 Name CX-ACM-2m CX-ACM-5m CX-BFCM-2m CX-BFCM-5m CX-mXLR-2m CX-mXLR-5m CX-BFBF-2m CX-BFBF-5m CX-BFXM-2m CX-BFXM-5m Coaxial cable, SMA-BNC, 2m Coaxial cable, SMA-BNC, 5m Coaxial cable, SMB-BNC, 2m Coaxial cable, SMB-BNC, 5m XLR-XLR-Cable 2m XLR-XLR-Cable 5m Coaxial cable SMB-SMB 2m Coaxial cable SMB-SMB 5m Coaxial cable XLRm-SMB 2m Coaxial cable XLRm-SMB5m ADAPTERS 730010 XLR male to BNC Adapter CV-BFXM Adapter for ICP microphone to XLR connection 730011 740010 740011 750010 750011 760010 760011 XLR-male to BNC socket. Wired according to IEC 268-12: pin 2 = signal / pin 1 and 3: connected to ground page | 12 sales@iSEMcon.com HOLDING CLAMPS / BUSHING / FAIRING MH-18D-SCR Fairing for 13D003 surface microphone, screw-down version Features: Diameter 35mm, height 3.2mm Color: black, other colors upon request Material: PVC, other material upon request Temperature: –20 to +65°C (-4 to +149°F) Holding clamp MH-99/SW Microphone clamp well suited for round and conical microphones, 5/8" thread MH-13D-CA Microphone Bushing for 13D082 housing Adapts 1/2" diameter microphone to standard microphone clamp MHC/SW Features: Inner diameter 1/2" (13mm) Outer diameter 18mm Color: black, other colors upon request Material: PVC, other material upon request Temperature: –20 to +65°C (-4 to +149°F) MH-18D-ADH fairing for use with adhesive tape, glue or wax Features: Diameter 30mm, height 3.2mm Color: black, other colors upon request Material: PVC, other material upon request Temperature: –20 to +65°C (-4 to +149°F) MH-07D-CA and MH-7101-CA Microphone bushing for use with 07D146 and 7101 series microphones adapts 1/4" diamter microphone to standard microphone clamp MHC/SW Features: Inner diameter 1/4" (7mm) Outer diameter 18mm Color: black, other colors upon request Material: PVC, other material upon request Temperature: –20 to +65°C (-4 to +149°F) MH-13D-SNK and MH-07D-SNK Microphone holding device, flexible, 1/2" "snake-hold" Features: 1/2" /13mm) microphone use or ¼” (7mm), Nylon clamp screw 3/8"-16 und 5/8"-27 standard thread Color: black/grey Material: POM/PVC Temperature: –20 to +65°C (-4 to +149°F) www.iSEMcon.com page | 13 Ordering information : Order No. Name General description The SC-1 sound calibrator is a one frequency dual amplitude,self contained field calibrator that quickly and also precisely verifies the accuracy and the sensitivity of microphones. The unit generates a 1kHz reference tone at 94 and 110 dB SPL. The calibrator uses a single 9 Volt battery. The SC-1 consists of a amplitude switchable constant frequency oscillator, a transducer and a microphone coupler. The coupler accepts a large variety of microphones. Separate 1/2" , 1/4" and 8mm adapters are available (others upon request). Regulation of the SPL-output is inherently provided against battery drain. Specifications output frequency 1kHz ± 0.2% output amplitude switchable 94dB / 110dB accuracy ± 0.5dB @ 20ºC [68ºF] and 1013mbar [760mm Hg] Operating Temperature -5ºC to 55ºC [40ºF to 130ºF] Temperature drift Coefficient of SPL is -0.08 to -0.012 dB/K Humidity 5 to 95% relative humidity Power supply: 9V standard transistor battery (Low Batt control) Construction Solid state integrated circuitry in stainless steel/plastic housing Size: dia 40mm [1.57"], x 132mm [5.24"] 222010 230010 230020 220010 220011 220021 220022 220020 MH-99/SW Fairing for boundary surface microphone MH-18D-ADH Fairing for boundary surface microphone MH-18D-SCR Flexible Holding device for 1/2" mm microphone MH-13D-SNK Flexible Holding device for 7mm microphone MH-07D-SNK Microphone bushing MH-07D-CA Microphone bushing MH-07D/7101-CA Microphone bushing MH-13D-CA SOUND CALIBRATORS SOUND CALIBRATOR SC-1 9V battery powered 94dBspl 110dBspl switchable ¼“ or ½“ or individual adapters stainless steel body Theory of operation The oscillator is a crystal stabilized squarewave oscillator followed by a squarewave to sine converter. Automatic gain control and temperature compensation are built-in. The oscillator output drives the transducer and is converted to sound. Ordering information : Order No. Name 230110 230210 230220 230230 230290 SC-1 Sound Calibrator CA ¼ Adapter CA ½ Adapter CA 8 Adapter CA cust, specifiy diameter page | 14 sales@iSEMcon.com Notes: __________________________ ________________________________ www.iSEMcon.com page | 15 iSEMcon worldwide sales ● ● iSEMcon GmbH, Germany iSEMcon LLC, USA iSEMcon CONTACT information Need more infos, datasheets, drawings – please contact us. iSEMcon GmbH Alexanderstr. 66 68519 Viernheim, Germany Phone +49 (0) 6204 911 24 91 Fax +49 (0) 6204 911 24 90 iSEMcon, LLC PO Box 607 Sylvania, OH 43560-0607 Phone: 1.877.309.1002 Fax: 1.419.517.5007 www.iSEMcon.com All products are made in Germany 1*The corporate names and names of the products stated in this brochure are trademarks or registered trademarks of the respective companies. Is registered trademark of iSEMcon GmbH, Germany. USA registration pending page | 16 sales@iSEMcon.com
0 comments
